Cut Supermarket Fixture CapEx & Labor by 40%
Enterprise-grade shelf edge systems manufactured in South Africa using precision injection moulding technology and off-grid solar production. Zero-tape installation. Modular replacement. Landed cost that redefines your procurement model.
Operational Math: Zero-Tape Labor Savings
Every roll of tape your team applies is a line item in your labor budget. Here is what the numbers look like when you eliminate it entirely.
Traditional Tape-Based Systems
- Recurring adhesive tape procurement cost per store
- 3–5 minutes per label change including tape application & cleanup
- Shelf edge damage from adhesive residue over time
- Full unit replacement when extrusion wears out
- Inconsistent aesthetics from tape misalignment
- Barcode scanning errors from label curl and glue haze
Global Retail Fixtures Zero-Tape Systems
- $0 tape cost — snap-on, clip-in, cable-tie installation
- Under 60 seconds per label change, no tools required
- Clean shelf edges — no residue, no damage, no downtime
- Modular replacement — swap only the insert strip (UNiTRACK)
- Crystal-clear finish — optimized for barcode scanner accuracy
- 10+ color options — consistent brand aesthetics chain-wide
Core Shelf Edge Systems
Precision injection-moulded shelf edge profiles engineered for high-traffic supermarket environments. Filter by application category or browse all 18 systems — every profile is available in custom lengths, widths, and colors. Don't see your current profile listed? We manufacture to any specification.
The ultimate clip-on shelf label extrusion. World-first modular front section means only the insert strip is replaced — not the entire unit. Includes free insert strip and thumb-press HDPE rivets.
- Tool-free installation & label changes
- Sizes: 33mm × 905mm to 1500mm
- 10+ colors including custom RAL
- Compatible with A6 & ¼A4 promo holders
Transforms standard metal C-track shelving instantly, ideal for high-traffic supermarket environments. Pops directly into fridge tracking without tape. Open edge faces down to prevent dirt ingress while maintaining a strong clip hold.
- Zero-tape C-track installation
- Sizes: 33–30mm × 1000mm / 1200mm
- Crystal-clear barcode-optimized finish
- Custom lengths to shelf specification
Semi-permanent label holder with integrated cable ties, purpose-built for wire basket and refrigerated display areas. Once secured, stays firmly in place through high-traffic conditions.
- Integrated cable tie attachment
- Size: 33mm × 95mm
- White or black cable tie options
- Ideal for produce & bulk food sections
Designed for high-casualty aisles. Prevents strips from being pulled off by carts or customers. Protects against oil, powder, and substance buildup that degrades standard profiles.
- Heavy-duty shelf edge lock profile
- Size: 33mm × 914mm
- Clear, matte, or frosted finish
- Ideal for FMCG & cleaning product aisles
Universal roll-clip profile for shelves, baskets, and fridges. Clips over any standard shelf edge to attach promo holders, write-and-wipe boards, and A-frames. Easy install and removal.
- Universal shelf edge clip-over design
- Sizes: 33×95mm / 75×105mm
- Accepts frames, promo holders, write-wipes
- Custom sizes available on request
World-first triple-weld insert strip that slides in and out of the UNiTRACK extrusion. Replace only the front strip — not the base unit. Dramatically reduces per-update fixture cost.
- Slides in/out without tools
- Sizes: 33mm × 914mm / 1000mm
- 10+ color options
- Sold in bulk for chain-wide rollouts
Clips directly into the UNiTRACK promo groove. Displays A6 (75×105mm) promotional cards at shelf level for targeted upsell and cross-sell messaging. Sold in boxes of 50.
- Integrates with UNiTRACK promo groove
- A6 (75×105mm) card format
- Box of 50 units
- Crystal-clear display finish
Integrates the flexibility of a strip with the convenience of a clip-on extrusion. Fast, hassle-free replacement of promotional shelf talkers without removing the base unit. Sold in boxes of 50.
- ¼ A4 format promotional display
- Clip-on to UNiTRACK system
- Box of 50 units
- Interchangeable front section
Angled profile that presents labels at a 45-degree viewing angle for improved shopper readability. Ideal for low-shelf positions where eye-level viewing is critical.
- 45° angled label presentation
- Standard 33mm × 1000mm
- Multiple color options
The patented original shelf edge label holder that started it all in 1986. Snap-on adhesive-backed profile that replaced gum labels across major retail chains. Still the industry benchmark.
- Original patented snap-on design
- Standard 33mm × 1000mm
- Adhesive-backed for permanent install
Extended front lip profile that provides additional label protection and a premium aesthetic. Suitable for high-end grocery and specialty food retail environments.
- Extended front lip design
- Standard 33mm × 914mm
- Premium clear finish
Precision-engineered tight-fit profile that grips shelf edges with minimal play. Eliminates label rattle and misalignment in high-vibration environments such as refrigerated sections.
- Tight-fit precision profile
- Standard 33mm × 95mm
- Anti-rattle design
Specifically engineered to clip onto glass shelving without adhesive or damage. Ideal for wine, spirits, and premium grocery sections with glass display shelving.
- Non-adhesive glass shelf clip
- Standard 33mm × 1000mm
- No damage to glass surfaces
Clips directly onto wire basket frames for clean, professional labeling of bulk bins, produce baskets, and promotional dump bins. No tools, no tape, no damage.
- Wire basket clip-on design
- Standard 33mm × 1000mm
- Suitable for produce & bulk bins
Wide-profile strip designed for maximum visual merchandising impact. Accommodates larger promotional inserts and brand messaging at the critical shelf edge decision point.
- Wide merchandising profile
- Standard 33mm × 1000mm
- Supports oversized promo inserts
Dynamic bouncing card holder that draws shopper attention to promotional items. Crystal-clear finish maximizes card visibility. Attaches to shelf edge without adhesive.
- Attention-grabbing bounce effect
- Size: 75mm × 210mm
- Crystal-clear card display
Compact stacked card holder for high-volume promotional display at shelf edge. Holds multiple cards for customer takeaway. Ideal for loyalty programs and recipe cards.
- Multi-card stacked display
- Size: 75mm × 210mm
- Customer takeaway format
Magnetic-attachment version of the Stack Card for metal shelving systems. No drilling, no adhesive — simply place and reposition anywhere on the gondola face.
- Magnetic attachment — no tools
- Size: 75mm × 210mm
- Repositionable anywhere on gondola
Don't See Your Current Profile? We'll Manufacture It.
If your stores currently run a shelf edge profile from a European, American, or domestic supplier that isn't listed in our catalogue, our South African manufacturing partner can replicate or engineer it to your exact specification — at the same 35–45% landed-cost advantage.
Send us a sample, a technical drawing, or simply a photograph of your existing profile. Our engineering team will assess compatibility, confirm dimensional tolerances, and provide a matched specification within 5 business days.
- 1 Submit your existing profile sample, drawing, or photo via the quote form below
- 2 Our engineers assess and confirm dimensional match within 5 business days
- 3 Receive a matched specification with landed-cost comparison vs. your current supplier
- 4 Approve tooling and proceed to production — minimum order quantities apply
Custom Profile Capabilities
Compatible with all standard gondola systems including Lozier, Madix, RDI, Handy Store Fixtures, and European DIN-standard shelving. Custom RAL color matching available on orders of 5,000+ units.
Material options: crystal-clear polycarbonate, HDPE, ABS, and custom compound blends. All profiles available with material certificates and dimensional inspection reports.
📋 Your Quote Basket
No products added yet.
Click “+ Add to Quote” on any product card.
The South African Manufacturing Advantage
Three structural advantages converge to deliver landed costs that no domestic or European supplier can match — without sacrificing a single millimeter of precision.
ZAR Currency Arbitrage
The South African Rand trades at a persistent structural discount to USD, EUR, and GBP. Enterprise procurement teams who source in ZAR and land in their home currency capture a built-in cost advantage that compounds with every order cycle.
Precision Injection Moulding
Our manufacturing partner operates European-specification injection molding machinery with precision tooling and rigorous quality control protocols. The result is dimensional accuracy, surface finish, and material consistency indistinguishable from any premium European manufacturer.
Off-Grid Solar Manufacturing
The production facility operates on a dedicated off-grid solar infrastructure, eliminating grid dependency and ensuring uninterrupted production schedules regardless of utility conditions. This translates to reliable lead times and a measurably lower carbon footprint for your supply chain.
Frequently Asked Questions
Questions from VP Store Development and Procurement Officers considering a fixture CapEx audit.
Request a Landed-Cost Arbitrage Audit
Discover exactly how much your supermarket chain can save. Our enterprise procurement specialists will provide a custom cost-reduction analysis within 5 business days — at no cost and no obligation.
- Full CapEx comparison: your current supplier vs. South African landed cost
- Labor savings model based on your store count and label-change frequency
- Product specification mapping to your current fixture types
- Freight, duties, and lead time analysis for your geography
- Sample kit dispatched to your procurement office
Get Your Free Audit
Typically saves 35–45% on fixture CapEx. Delivered in 5 business days.